Технички спецификации
16GB Module – DDR4 2666MHz
Part Number: KVR26N19D8/16
Specs: DDR4 , 2666MHz , Non-ECC , CL19 , 1.2V , Unbuffered , DIMM
DESCRIPTION
This document describes ValueRAM’s KVR26N19D8/16 is a 2G x
64-bit (16GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 2Rx8,
memory module, based on sixteen 1G x 8-bit FBGA components. The
SPD is programmed to JEDEC standard latency DDR4-2666 timing of
19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The
electrical and mechanical specifications are as follows:
FEATURES:
• Power Supply: VDD=1.2V Typical
• VDDQ = 1.2V Typical
• VPP – 2.5V Typical
• VDDSPD=2.2V to 3.6V
• Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
• Low-power auto self refresh (LPASR)
• Data bus inversion (DBI) for data bus
• On-die VREFDQ generation and calibration
• Dual-rank
• On-board I2 serial presence-detect (SPD) EEPROM
• 16 internal banks; 4 groups of 4 banks each
• Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF)
• Fly-by topology
• Terminated control command and address bus
• PCB: Height 1.23” (31.25mm)
• RoHS Compliant and Halogen-Free
SPECIFICATIONS:
CL(IDD) – 19 cycles
Row Cycle Time (tRCmin) – 45.75ns(min.)
Refresh to Active/Refresh
Command Time (tRFCmin) – 350ns(min.)
Row Active Time (tRASmin) – 32ns(min.)
Maximum Operating Power – TBD W*
UL Rating – 94 V – 0
Operating Temperature – oC to +85oC
Storage Temperature – -55oC to +100oC
Reviews
There are no reviews yet.