SODIMM Notebook Memory Kingston 16GB CL19 DDR4 2666MHz 1.2V
4.650,00ден
Технички спецификации
KVR26S19D8/16 is a 2G x 64-bit (16GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM),2Rx8, non-ECC, memory module, based on sixteen 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. This 260-pin DIMM uses gold contact fingers. The electrical and mechanical
specifications are as follows:
FEATURES:
• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
• Low-power auto self refresh (LPASR)
• Data bus inversion (DBI) for data bus
• On-die VREFDQ generation and calibration
• Dual-rank
• On-board I2 serial presence-detect (SPD) EEPROM
• 16 internal banks; 4 groups of 4 banks each
• Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF)
• Fly-by topology
• Terminated control command and address bus
• PCB: Height 1.18” (30.00mm)
• RoHS Compliant and Halogen-Free
SPECIFICATIONS:
CL(IDD) – 19 cycles
Row Cycle Time (tRCmin) – 45.75ns(min.)
Refresh to Active/Refresh – 350ns(min.)
Command Time (tRFCmin)
Row Active Time (tRASmin) – 32ns(min.)
Maximum Operating Power – TBD W*
UL Rating – 94 V – 0
Operating Temperature – 0o C to +85o C
Related products
-
SODIMM Notebook Memory Kingston 4GB CL11 DDR3 1600MHz Low Voltage
1.999,00денВо кошничкаТехнички спецификации SPECIFICATIONS CL(IDD) 11 cycles Row Cycle Time (tRCmin) 48.125ns (min.) Refresh to Active/Refresh 260ns (min.) Command Time (tRFCmin) Row Active Time (tRASmin) 35ns (min.) Maximum Operating Power (1.35V) = 2.376 W* UL Rating 94 V – 0 JEDEC standard 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V) Power Supply • VDDQ = …
SODIMM Notebook Memory Kingston 4GB CL11 DDR3 1600MHz Low VoltageRead More
Reviews
There are no reviews yet.